Kimura Soap Toilet Tank Cleaner (8 Uses)

Contents: 8 individual packets × 35 g each (total 8 uses)
pH: Mildly alkaline

A drop-in, soak-only cleaner for toilet tanks. Just add one packet and let it sit to help break down and disinfect the bacteria and limescale inside the tank—common causes of bad odors and black mold. It also cleans the inside of the toilet bowl and the flush water outlet pipe at the same time.
Oxygen-based, so there’s no sharp, irritating smell, and the convenient individually wrapped packets make it easy to use whenever needed.

How it works / Benefits

• Helps decompose and remove grime that causes odors and black mold in the tank

• Disinfects the inside of the tank

• Cleans the bowl interior and water outlet pipe simultaneously

• Oxygen-based formula (less harsh odor)

• Easy to store and use: 8 single-use packets

Recommended use frequency

• About once every 1–2 weeks

Directions

Step 1
Flush once to drain the tank. During refilling, add 1 packet through the hand-wash water outlet (the small faucet on top of the tank).

Step 2
Leave for at least 2 hours, then flush to rinse.

For stubborn dirt:

• Repeat the process, or use 2 packets.

If your tank has no hand-wash faucet:
Open the tank lid and add the packet directly into the tank.

Note:
Stains above the waterline inside the tank will not be removed by soaking alone. After adding the powder, scrub those areas with a brush.

Important precautions

• Not compatible with toilet tanks that directly supply water to bidet/washlet functions (models where the bidet draws water from the tank).

• If your tank does not have a hand-wash feature, use by opening the lid.

Ingredients

Surfactant (sodium lauryl sulfate), oxidizer (sodium percarbonate), alkaline agent (carbonates), water softener (nitrilotriacetate), enzymes.